Phone Orders Accepted!
800.421.6265 | 323.268.8514

Accepted payment methods: Visa | MasterCard | American Express | PayPal

Steel It CoatingSteel-It Epoxy Primer Gallon #4210G

Steel It CoatingSteel-It Epoxy Primer Gallon #4210G

Catalog No.: 80121-PR
Price: Ask for quote



Two-part polyamide epoxy featuring the stainless steel leafing pigment
The two parts of each coating mix in ratios of 1:1
Solvent based coatings
Color: Gray
Sheen: Low gloss
Total solids: 60% (by weight), 50% (by volume)
Viscosity K.U.: 70-75
Weight per gallon: 10.6 lb
Shelf life: 1 year
Approximately 250-275 sq ft coverage per gallon at 3.0 dry mil DFT (dry film thickness)
Apply only when surface and ambient temperatures are above 50° F
Relative humidity must be less than 86%
Surface temperature must be at least 5° F above the dew point
Recommended for surfaces where the operating temperatures will not exceed 200° F
Dry to touch in 2 hours
Allow 12 hours between coats
Subsequent coats will be tack free to handle in 24 hours
Light service in 36 hours
For complete cure (full protection and hardness) allow 6-7 days
Lower temperatures delay curing time
May be applied by brush, roller, or spray gun
Conventional or airless spraying is the preferred method
Although designed primarily for the protection of ferrous metals, the coating may be applied directly to non-metallics such as wood, tile, glass, masonry, porcelain, plaster, fiberglass, masonite, and many other non-porous surfaces